What should we pay attention to when we are in gear machining engineering?

In order to ensure the details of gear processing, the requirements for the operation process are still relatively high, and each link has strict requirements. The following are the details that need to be paid attention to during the gear processing process.

1. The connection is a very important step in gear lubrication and cleaning, so before checking the gear grinding teeth, we should clean the gear grinding teeth, and then disassemble the gear grinding teeth and surrounding components.

2. Many factors will directly affect the service life of gear grinding teeth, especially manufacturing, assembly and use, which is closely related to the service life of gear grinding teeth. Only by doing a good job in every link can the gear grinding teeth be in good working condition, thereby prolonging the service life.

3. We need to check the lubricant of the gear grinding teeth. Because lubrication is so important, it applies not only to gear grinding, but also to bearings. It is important to note that gear grinding should not add too much grease. The check method of gear grinding lubricant is as follows: Rub two fingers with a small amount of lubricant. If there are no contaminants, they can be felt; Or apply a layer of lubricant to the back of the hand and seal it. Then replace the gear grinding lubricant.

4. The oil seal is a very weak component. If you are inspecting and disassembling, you need to be extra careful. Do not apply too much force so as not to damage the gears. Then carefully inspect the oil seal of the gear grinding teeth and its surrounding parts. If no adverse symptoms occur, they need to be replaced. Due to poor oil seals, damage during gear processing can lead to different bearing clouds, resulting in equipment downtime.